350-001 - Page 2 of 2 - Unlimited Lifetime Access to 1800+ Certification Exams Questions & Answers

Cisco 350-001 Certification Exam, Easily To Pass Cisco 350-001 Questions Is What You Need To Take

cisco300June 18, 20160

New VCE and PDF– If you want to pass Cisco 350-001 exam successfully,do not miss to test Cisco latest Cisco 350-001 brain dumps.All Cisco 350-001 the new questions and answers were timely added, visit Flydumps.com to free download VCE player and PDF files.

QUESTION 60
What are the states that ISIS neighbors go through during the process of building adjacencies?
A. Init, Up
B. Init, 2-way, Full
C. Loading, Start, Synchronizing, Up
D. Init, 2-way, Exstart, Exchange, Up
E. Adjacency formation will be automatic
Correct Answer: A
QUESTION 61
What is an LSP known as in an MPLS network?
A. Label Switched Pair
B. Label Switched Path
C. Link Switch Path
D. Liability Switched Pair
E. Label Switched Protocol
F. Link State Path
Correct Answer: B
QUESTION 62
Which of the following statements are NOT true regarding the TCP sliding window protocol? (Choose all that apply)
A. It allows the transmission of multiple framesbefore waiting for an acknowledgement.

Cisco

Updated New Cisco 350-001 New Dumps Download with Latest Exam Test Flydumps

cisco300May 3, 20160

Why has this switch not been elected the root bridge for VLAN1?
A. It has more than one interface that is connected to the root network segment.
B. It is running RSTP while the elected root bridge is running 802.1d spanning tree.
C. It has a higher MAC address than the elected root bridge.
D. It has a higher bridge ID than the elected root bridge.

Correct Answer: D Section: (none)Explanation
Explanation/Reference:
QUESTION 2
Refer to the exhibit . Which switch provides the spanning-tree designated port role for the network segment that services the printers?

A. Switch1
B. Switch2
C. Switch3
D. Switch4

Correct Answer: C Section: (none)Explanation
Explanation/Reference:
QUESTION 3
Refer to the exhibit.

At the end of an RSTP election process, which access layer switch port will assume the discarding role?

Cisco

FLYDUMPS – Take Your Cisco 350-001 All New Questions And Answers Flydumps Download

cisco300May 3, 20160

Exam A
QUESTION 1
Which of these statements about penultimate hop popping are true? (Choose three)
A. It is used only for directly connected subnets or aggregate routes
B. It can only be used with LDP.
C. It is only used when two or more labels are stacked.
D. It enables the Edge LSR to request a label pop operation from Its upstream neighbors
E. It is requested through TDP using a special label value that is also called the implicit-null value.
F. It is requested through LDP using a special label value that is also called the implicit-null value.

Correct Answer: ADF
QUESTION 2
Refer to the exhibit. R4 is a remote office router that is running EIGRP; the decision has been made to change EIGRP to use static EIGRP adjacencies. However, once the configuration change was applied, the adjacency between R4 and 209.165.202.139 (HQ) seems to disappear. What could be the cause of this issue?

Cisco

Cisco 350-001 Exam Certification – 100% Free VCE Files Flydumps

cisco300May 3, 2016May 3, 20160

Exam A
QUESTION 1
What is the effect of using the “logging ari_server” command?
A. logs messages to the console named ari_server
B. logs messages to a syslog server named ari_server
C. logs messages to the buffer of the ari_server console
D. logs messages to a virtual terminal line called ari_server

Correct Answer: B
QUESTION 2
Which of the following provide for IBM mainframe attachment?
A. FIP
B. TRIP
C. CIP
D. FEIP

Correct Answer: C
QUESTION 3
If the DTE side of a serial link is in the condition below, which of the following actionsmay be taken to determine the problem?

Cisco

100% Valid Download From Flydumps Latest Cisco 350-001 Pdf Exam Free Practice Test Ensure You 100% Pass From Flydumps

cisco300April 29, 20160

Exam A QUESTION 1
Given the shown output, which statement is true regarding the router forwarding a packet to 192.168.32.1?

A. The packet will be forwarded to 10.1.1.1.
B. The packet will be forwarded to 10.1.1.2.
C. The packet will be forwarded to 10.1.1.3.
D. The packet will be forwarded to the default gateway.
E. None of the above — this is an invalid output.

Correct Answer: A
QUESTION 2
In the illustrated network, all routers are configured to run EIGRP on all links. R2 is configured to send a summary route only to R4, R5, and R6. If the link between R1 and R2 fails, what is the maximum number of queries R3 will receive for 192.168.1.0/24, given that all the packets transmitted during convergence are transmitted once (there are no dropped or retransmitted packets)? Will R4, R5, or R6 receive any queries?

A. R3 will receive one query for 192.168.1.0/24, from R2. R4, R5, and R6 will each receive, and reply to, one query each.
B. R3 will receive 4 queries for 192.168.1.0/24, one each from R2, R4, R5, and R6. R4, R5, and R6 will each receive, and reply to, one query each.
C. R3, R4, R5, and R6 won’t receive any queries for 192.168.1.0/24, since there’s no alternate path to this destination within the network
D. R3 will receive one query for 192.168.1.0/24. R4, R5, and R6 will not receive any queries for this destination, because R2 isn’t advertising this network towardsthem.

Cisco

Cisco 350-001 test: High Pass RateCisco 350-001 Flydumps With All New Exam Questions

cisco300April 29, 20160

QUESTION 1
You have a Catalyst 6500 with a Supervisor IA with a MSFC. After a power outage, the MSFC has lost its boot image and now will only boot into ROMMON mode. You want to load a new image onto the Catalyst MSFC boot flash. What method can you use?
A. Console connection using Xmodem
B. FTP
C. TFTP
D. SNMP
E. SSH
Correct Answer: A
QUESTION 2
Which of the following statements regarding the use of SPAN on a Catalyst 6500 are true?
A. With SPAN an entire VLAN can be configured to be the source.
B. If the source port is configured as a trunk port, the traffic on the destination port will also be tagged, irrespective of the configuration on the destination port.
C. In any active SPAN session, the destination port will not participate in Spanning Tree.
D. It is possible to configure SPAN to have a Gigabit port as the destination port.
E. In one SPAN session it is possible to monitor multiple ports that do not belong to the same VLAN.

Cisco

Recent Updated New Cisco 350-001 Dumps with Exam Practice Questions

cisco300April 27, 20160

Exam A
QUESTION 1
Spanning Tree Protocol IEEE 802.1s defines the ability to deploy which of these?
A. one global STP instance for all VLANs
B. one STP instance for each VLAN
C. one STP instance per set of VLANs
D. one STP instance per set of bridges

Correct Answer: C
QUESTION 2
Which two of these are used in the selection of a root bridge in a network utilizing Spanning Tree Protocol IEEE 802.1D? (Choose two.)
A. Designated Root Cost
B. bridge ID priority
C. max age
D. bridge ID MAC address
E. Designated Root Priority
F. forward delay

Correct Answer: BD
QUESTION 3
If a port configured with STP loop guard stops receiving BPDUs, the port will be put into which state?
A. learning state
B. listening state
C. forwarding state
D. root-inconsistent state

Correct Answer: D
QUESTION 4
What is the purpose of the STP PortFast BPDU guard feature?